The Gamma Versaulter (Airborne Unit) consists of a Gamma Versaulter coupled with the Wing Booster to expand flight functions, and landing gear to stabilize the landing balance of the Versaulter when both units are connected. The basic color of the fuselage is dark gray.
It launches in machine mode, which allows it to move at high speed over long distances, and then shifts to Mech Mode or Battle Maneuver Mode at the deployment point for combat maneuvers. It is also capable of aerial combat maneuvers with the airborne unit installed.
Gamma Versalter (Airborne Unit) Front
Gamma Versalter (Airborne Unit) Rear
stabilizing anchor
An anchor used to to proved stability to a V.F.S. Versaulter unit. It stabilizes the Versaulter by driving it into the ground when using high-recoil artillery weapons that would otherwise be unsuitable/too powerful for the unit to use effectively. The stabilizing anchors can also be used in conjunction with the legs for more versatile applications.
Size comparison with other products
Tactical Bollet Core / Gamma Type
Periscope-type VR cockpit that transmits external sights and information to the pilot via multi-visual sensors at the front of the fuselage to increase explosion resistance.
To reduce the stress of the enclosed space, the cockpit is maneuvered with the hatch open during non-combat situations such as work, movement, and standby.
“Dia-Naut” (Diaclone Crew)
This tiny (3cm tall) Diaclone action figure has multiple points of articulation including: torso, waist, shoulders, elbows, legs and knees, and now, since Ver 2.0, even the head, for a total of 10 places, allowing it to express a range of poses, including pilot posture.
Built-in neodymium magnets on the soles of the feet makes it possible to stand independently on attractive materials such as iron.
Machine Mode
Long-range high-speed flight machine form. Standard armaments are suspended on each part of the fuselage, and the Stinger Z-1 heavy machine gun can be used in its suspended state.
Machine mode front
Machine mode rear
Gammaversealter’s mechanical system
Mech Mode
Bipedal high mobility machine form. By using the connected wing booster, it can perform tricky combat maneuvers such as hovering and gliding.
Mech Mode Front
Mech Mode Rear
Mech Mode Front 2
Armament of Gamma Versalter
Armed and equipped
Armed to the teeth with Handgun “Thug Buster”, Heavy machine gun Stinger Z-1, deflector shield and combat sword.
Handgun/”Thug Buster”
A small artillery weapon that fires FZ gravity bullets. Ammunition (20+1) rounds.
Stinger Z-1 Heavy Machine Gun
A hybrid two-way large artillery weapon consisting of two barrels; one capable of firing micro APEX bullets in solid shot bursts, and the other of directional FZ energy pulse beam blasts.
Combat Sword
A photon cutting weapon powered by fist/hand connection. Used to deadly effect during close combat maneuvers.
Deflector Shield
A versatile force field-generating explosive-resistant defense shield and weapon, equipped with a spike driver on the reverse side. Can be operated as a large gauntlet for close combat maneuvering by separating into two units and attacking with the spike driver.
ARTICULATION & ACTION POSES
All photos shown are under development. Please note that the actual product may differ slightly.
What is Tactical Mover?
About Tactical Mover
In response to the complex and unpredictable attack patterns of the invading Waruda swarms, the Diaclone bases around the world have been forced to form specialized tactical units able to operate within or apart from from the main combat units, and that can deal with a variety of fragmented problems.
Borrowing from, and building upon, established Diaclone VERS technology, and incorporating the best of Diaclone science and technology, the Tactical Mover family of machines are state-of-the-art combat mecha with the power to compete with the increasing strength of the current generation of Waruda attack technology.
This is the birth of the Tactical Mover.
What is the Tactical Mover?
(Tactical Mover) is a general term for a variable-type tactical mobility machine that has the agility of a PS (Powered Suit) machine and the interchangeable variable functionality of a Tri-Verse machine, while also having more combat power than a PS machine and more versatility than a Tri-Verse machine.
It is composed of a variable frame system (VFS = VERS Frame System) and a cockpit module (Bullet Core), which was developed based as a compatible multi-purpose combat system . Depending on the situation, it can change its form into a combat vehicle, a two-legged high-mobility machine, or a humanoid combat machine, and can respond to various battle scenarios and missions.
The prototype of the Tactical Mover is a benchmark model of the PSM-Gamma type, which has the most well-balanced combat potential, and has been developed with the goal of blowing up the total machine power value, such as maximum power, machine strength, and drive power, to more than six times that of the PSM-Gamma machine in decisive battle mode. It was developed with the goal of blowing up the overall aircraft strength value to more than six times that of the PSM-γ.
In addition, all tactical movers are equipped with the multiple coordinated attack system as standard equipment, which was first introduced in the field in the PSM-γ machines. Like the PSM-Gamma, it is a machine that shows its true value in team combat maneuvers.
Like the PSM-γ, it is a machine that shows its true value in team combat maneuvers. Furthermore, like the PS machines and medium-sized Trivers machines, it has dedicated external optional units that specialize in functions such as flying, running, and artillery, and by combining with these units, it can perform more powerful and advanced combat maneuvers.
Tactical Bullet Core
A cockpit module that has overall control of the Tactical Mover. The head unit is equipped with the latest generation of the B.I.G.-A.I combat operating system.
As typical of all Diaclone Bullet Core machines, it has the functions of a wingless thruster aircraft capable of short-range aerial flight, and serves as an emergency escape pod in the event of a major frame failure.
V.F.S.: Vers Frame System
A variable limb-forming frame unit developed from the VERS compatible multi-purpose combat system. Each arm, waist, and leg unit uses an in-unit independent drive system with a built-in generator, so that even if some of the units are destroyed, the overall drive system can continue fighting without interruption.
There are frame variations for different functions and environments, such as a ultra high-mobility types as well as aquatic etc.
It can also be connected to other series of Bullet Core modules, but the control circuit system must be adjusted in order to achieve the same level of maneuverability control as the dedicated Tactical Mover Bullet Core.