Ref Code: | D-02 |
Faction: | 79 |
Series: | (D)Vehicles |
Type: | Set 2 |
Class: | |
Crew: | 1 |
Armaments: | |
Notes: |
load chamber
A transport module type armored machine with self-propelled capabilities. It has a variety of connection functions such as tandem connection of several machines and train-style connection, and is used for transporting and storing relatively small machines such as Diaclone squadron vehicles and PS machines.
It is also possible to construct simple forward bases, aircraft parking facilities, etc. by vertically or cross-connecting the chamber core with the wheel units separated.
Dia-Nauts (Diaclone crew)
A crew member wearing a reinforced ‘Diatektor) armor suit .
This miniature action figure is 3cm tall and has a total of 10 movable joints, including the head, arms, hips, and legs, allowing for a variety of poses as well as riding positions.
The soles of the feet have built-in neodymium magnets that allow them to stand on their own on adsorption materials such as iron.
Load chamber structure
The left and right anti-explosion side panels and the lower left and right wheel units have a separate structure and can be attached and detached depending on the operational purpose.
Storage of various joint parts
Various joints are stored in each part of the aircraft.
Expanding the hatch
Vehicle Storage
Bullet module storage
Items other than (D)Vehicles/Set 2 are not included in the product.
V mover storage
Items other than Vehicles/Set 2 are not included in the product.
Motorcycle/Armored Car Storage
Items other than Vehicles/Set 2 are not included in the product.
Powered suit (first generation) storage
Items other than Vehicles/Set 2 are not included in the product.
Load chamber connection variations
Vertical concatenation
Direct connection with front and rear connecting joints
Items other than Vehicles/Set 2 are not included in the product.
Train type connection (using coupling machine)
Expand and connect the front and rear couplers
Items other than Vehicles/Set 2 are not included in the product.
V mover storage
Connected with 4mm joint x 2
Left and right connection B
Remove the side panel and connect with the built-in joint
Chamber core connection variations
Connection pattern with the chamber core separated from the wheel unit.
Vertical connection
Connect the roof joint and the groove at the bottom of the chamber core
Cross connection (using L-shaped joint)
Connect using an L-shaped joint